Ericsson AVP 4000 Reference Manual Download Page 63

Page: 63 / 422

Getting Started

1/1553-FGC 101 1790 Uen Y

3-27

To set up an encode configuration:
1. Ensure the two cards to be used are numerically adjacent in the chassis. For

example, cards in slots 3 and 4 (any adjacent pairing may be used).

2. Plug the HD-SDI coaxial cable into the BNC connector on the lower numbered

slot. The data from this HD-SDI feed may be used by the card in the next

adjacent superior slot. For example, if the HD-SDI feed is on slot 3, then slot 4

may be set up to use the HD-SDI data from slot 3.

3. Set up the encode service for the lower-numbered slot as documented in section

3.7.5 How to Configure Output Transport Streams

4. To set up the encode service for the higher-numbered slot, right-click on the

service, and select

Add Additional Output Service

On Adjacent card (slot

4 ) > [encode type]

Figure 3.13 Adding Additional Output Service

5. When the new service has been created, modify and check all settings for all

components, and then click the

Apply All

button to save the changes made.

Note:

Only incoming video with HD resolutions are supported for this use case.

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Search results

Summary of Contents for AVP 4000

Reviews:

Ericsson AVP 4000, Reference Manual, Page: 63 / 422

Search results

Summary of Contents for AVP 4000

Reviews: