Ericsson AVP 4000 Reference Manual Download Page 68

Page: 68 / 422

Getting Started

3-32

1/1553-FGC 101 1790 Uen Y

•

For an incoming SPTS VBR Unicast stream, set the

Transport Stream Mode

VBR

. This will automatically disable Input FEC Control, which is not supported

for VBR input. Set the

Source IP Address

to the incoming stream address and

set the

Multicast IP Address

to 0.0.0.0.

Figure 3.21 Setting Transport Stream Mode to VBR (SPTS Unicast)

•

For an incoming CBR Unicast, which may be SPTS or MPTS, set the

Transport

Stream Mode

CBR

. Set the

Input FEC Mode

Off

if not expecting FEC on

the incoming stream, or set the

Input FEC Mode

Auto

if FEC may be

expected on the incoming stream. Set the

Source IP Address

to the incoming

stream address and set the

Multicast IP Address

to 0.0.0.0.

Figure 3.22 Setting Transport Stream Mode to CBR (SPTS or MPTS Unicast)

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Search results

Summary of Contents for AVP 4000

Reviews:

Ericsson AVP 4000, Reference Manual, Page: 68 / 422

Search results

Summary of Contents for AVP 4000

Reviews: