Ericsson AVP 4000 Reference Manual Download Page 293

Page: 293 / 422

Advanced Video Processing and Networking

1/1553-FGC 101 1790 Uen Y

6-19

Figure 6.8 Slate Sensitivity Delay Settings

Lock loss generates alarms whether this feature is enabled or not. When it is

enabled, a fail over to slate will suppress further alarms from the next options, even

if these are enabled.

6.6.2.1.2

Option Detect under Action On > Freeze Frame

This feature functions in a similar way to the one above. The condition which starts

the hysteresis is the detection of a still picture. A natural still will not trigger the

condition, only a succession of identical frames. The hysteresis is defined by two

delays “Time Threshold Before Slate” and “Time Threshold Before Recovery”.

Timing is approximate: +/-3 seconds.

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Search results

Summary of Contents for AVP 4000

Reviews:

Ericsson AVP 4000, Reference Manual, Page: 293 / 422

Search results

Summary of Contents for AVP 4000

Reviews: