Ericsson AVP 4000 Reference Manual Download Page 167

Page: 167 / 422

Front Panel Control

1/1553-FGC 101 1790 Uen Y

4-27

Indefinitely: Maintains previously received AFD code indefinitely.
Default after Timeout: Maintains previously received AFD code for period

specified in Sustain Timeout, then drop to default, i.e. code 1000.
Off after Timeout: Maintains previously received AFD code for period specified

in Sustain Timeout, then switch AFD off.

AFD Sustain Timeout

0 to 5, 10, 20, 50, 100, 120. Control how long previous AFD code is

maintained. Zero means drop to default immediately on loss.

AFD Action on Reserved Codes

Pass Thru, Code as 0000.
Specify what code is passed to the output when reserved AFD codes are

received at the input.
Pass Thru: Passes code through unchanged.
Code as 0000: Changes code to 0000.

Closed Captions

Closed Captions Source

Off, SPMTE 334.

Timecode

TC Mode

Off, External, Zero on Loss, External, Freewheel on Loss, Internal. Controls

what mode the Time code (TC) is working in, either Off, external source or

internally generated. Also sets what happens on loss of external source (zero

or freewheel).

TC External Source

Auto, ANC VITC1, ANC VITC2, ANC LTC, VBI VITC. Controls the external

source of Time Code. Auto will select the first source present in order of the

drop down list.

TC Dropframes

Off, On, Auto.

Broadcaster ID

Reception Timeout

Enables entry/editing of reception timeout.

Insertion Timeout

Enables entry/editing of insertion timeout.

Broadcaster ID Mode

Off, Auto, Default Only, Source Only.

Default Servicename

Enables entry/editing of service name.

Broadcaster ID Source

Displays broadcaster ID source.

Broadcaster ID

Displays broadcaster ID.

Generic ANC

Generic ANC Extraction

On, off. Controls whether Generic ANC is extracted from the SDI stream or not

as per SMPTE 2038-2008.

Max ANC Bit Rate

100 to 2000 kbps. The maximum data rate of the Generic ANC data output.

Teletext

DVB syntax only.

Teletext Source

Off, VBI lines.

Teletext Packetisation

Normal (ETS 300-472) - Data on Teletext Component, Legacy (ETS 301-775) -

Data on VBI Component. Controls how the Teletext data is packetized in to a

component data stream.

Min # Teletext Packets

0 to 3. Defines the minimum number of Teletext packets generated per field,

even if there is no Teletext data.

PTS on Teletext

Off, on. Controls whether a PTS value is included in the output Teletext

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Search results

Summary of Contents for AVP 4000

Reviews:

Ericsson AVP 4000, Reference Manual, Page: 167 / 422

Search results

Summary of Contents for AVP 4000

Reviews: