Ericsson AVP 4000 Reference Manual Download Page 181

Page: 181 / 422

Front Panel Control

1/1553-FGC 101 1790 Uen Y

4-41

Audio Input Port 2

ioPortType

ioDirection

ioPortIndex

4.4.4

External Sync Input Option Card

The External Sync Input Option Card has no configurable parameters.

4.4.5

ASI I/O Option Card Advanced Menu

The front panel provides full access to the ASI option card's capabilities. The

advanced menu is listed in the table below.

Table 4.10 ASI I/O Option Card Advanced Menu

Build

ASI IO Option Card Id

The card identifier number.

Name

The name of the card.

Software Version

The software version loaded onto the card.

Hardware Version

The hardware version of the card.

Advanced

FPGA Temperature

Field Programmable Gate Array temperature.

Temperature

The measured temperature of the FPGA.

Temperature Alarm Threshold

The maximum operating temperature alarm value.

Over Temperature Threshold

The overtemperature alarm value.

ASI Output Streams

ASI Output <n>

Output Enabled

Advanced

Byte Mode Output

Good Average

Average Interpacket time

Good Values

Force Dump

Output Mode

Mirrored, Independent. Specifies whether the two outputs output the same

Transport Stream or they operate independently. If set to Mirrored, only one

output will be accessible.

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Search results

Summary of Contents for AVP 4000

Reviews:

Ericsson AVP 4000, Reference Manual, Page: 181 / 422

Search results

Summary of Contents for AVP 4000

Reviews: