Ericsson AVP 4000, Reference Manual, Page: 139 / 422

Getting Started
1/1553-FGC 101 1790 Uen Y 3-103
•
Start Msgs, major – critical – traps sent for start messages or alarms raised of
severity major to critical.
•
Start Msgs, critical
– traps sent for start messages or critical alarms.
•
Start Msgs only – traps sent for start messages only.
Table 3.29 SNMP Interface Parameters
Parameter Description
SNMP Read Community The SNMP community name for read access. default = public
SNMP Location Textual description of the location of the unit
SNMP Contact Name of the person responsible for this unit
SNMP Trap Community The SNMP community name for read access. default = private
SNMP Trap Destination The destination IP address for SNMP trap messages. Up to five destinations
can be defined, but by default none are assigned
SNMP Trap Alarm Level
Defines what events trigger the generation of an SNMP trap message. The
options are: Start Messages Only, i.e. only system start up events. Fail and
Start Messages only i.e. start-up events and critical alarms. All traps i.e.
start-up events and all alarms and warnings.