manualshive.com logo in svg

Ericsson AVP 4000, Reference Manual, Page: 325 / 422

Share
Download
Ericsson AVP 4000 Reference Manual Download Page 325

 

Preventive Maintenance and Fault-finding 

 

 

1/1553-FGC 101 1790 Uen Y

 

 

8-5 

 

 

 

8.1 

Introduction 

This chapter details the schedules and instructions, where applicable, for routine 

inspection, cleaning and maintenance of the equipment which should be performed 

by an operator. It also details basic fault-finding procedures.   

8.2 

Preventive Maintenance 

8.2.1 

Routine Inspection 

Check cooling fan operation regularly. The fans are temperature controlled so may 

not be on if the ambient temperature is low. Refer to 

Annex B, Technical 

Specification

 for more information. 

Note:

  Failure to ensure a free flow of air around the unit may cause overheating. 

This condition is detected by a temperature sensor on the Host Card or a 

MPM and causes the alarm to be raised. 

8.2.2 

Cleaning 

Caution! 

Do not use liquid cleaners or aerosol cleaners. 

Unplug the unit from the wall outlet before cleaning the exterior with a damp cloth. 

Do not use liquid cleaners or aerosol cleaners. 

Note:

  Only the exterior of the case should be cleaned. 

8.2.3 

Servicing 

8.2.3.1 

Damage Requiring Service 

Warning! 

Do not remove the top cover of this equipment. Hazardous voltages are present 

within this equipment and may be exposed if the top cover is removed. Only 

Ericsson trained and approved service engineers are permitted to service this 

equipment.  

Unplug the equipment from the wall outlet and refer servicing to qualified service 

personnel under the following conditions:  

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Reviews:

No comments