manualshive.com logo in svg

Ericsson AVP 4000, Reference Manual, Page: 314 / 422

Share
Download
Ericsson AVP 4000 Reference Manual Download Page 314

 

 

Options, Licensing and Upgrades  

 

7-10 

 

1/1553-FGC 101 1790 Uen Y

  

 

 

 

7.8 

CE-HEVC Option Cards 

7.8.1 

Overview 

The CE-HEVC VCM is can encode either a single HD HEVC video from SDI input 1, 

or a single UHD (4K) HEVC video using the 4 inputs provided.  

By default the basic card is purchased with no video or audio encode functionality. 

Licenses are required to enable all video and audio encoding functionality, while 2 

channels of MPEG-1 Layer II Audio are available by default. Video and audio 

encoding functionality is enabled or extended by the purchase of feature licenses, 

summarized in 

Chapter 1, Introduction

.

 

 

 

Figure 7.8  CE-HEVC Option Cards 

Note:

  Up to 

4

 CE-HEVC modules can be fitted. 

If the appropriate licenses are available, up to 16 channel pairs of audio can be 

encoded using the MPEG-1 Layer II algorithm, 6 audio channel pairs can be 

encoded in Dolby Digital or 6 channel pairs in (HE-) AAC.  

There is also an option to configure the unit to pass-thru pre-encoded Dolby Digital, 

Dolby-E or Linear PCM audio. 

Audio decode is not supported. 

The processing Vertical Blanking Interval (VBI) is not currently supported in this 

release. 

7.8.2 

Inputs 

There are two module options available providing either BNC or SFP inputs: 

•

  3G/HD-SDI Input via a 75 

Ω

 BNC female connector. 

•

  UHD using 4 off 3G-SDI Inputs via 75 

Ω

 BNC female connectors. 

Or 

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Reviews:

No comments