Ericsson AVP 4000 Reference Manual Download Page 172

Page: 172 / 422

Front Panel Control

4-32

1/1553-FGC 101 1790 Uen Y

AS Index Control

Don't Care, Use 1, Use 1 + 2. Only available when Splicing Control is set to On

VANC Message Only.
If set to Don’t Care, the AVP 4000 will create SCTE 35 output regardless of the

source Automation System.
If set to Use 1, the AVP 4000 will create SCTE 35 output only for incoming

SCTE 104 whose AS Index matches the setting in AS Index 1.
If set to Use 1 + 2, the AVP 4000 will create SCTE 35 output only for incoming

SCTE 104 messages whose AS Index matches either the setting in AS Index 1

or the setting in AS Index 2.

DPI PID Index Control

Don't Care, Use 1, Use 1 + 2. Determines how many values of DPI PID Index

are compared against the incoming SCTE 104 message. Available only when

Splicing Control is set to On VANC Message Only.

AS Index 1

0 to 255. The AS index used if AS Index Control is set to Use 1 or Use 1 + 2.

AS Index 2

0 to 255. The AS index used if AS Index Control is set to Use 1 + 2.

DPI PID Index 1

0 to 255. The DPI PID index used if DPI PID Index Control is set to Use 1 or

Use 1 + 2.

DPI PID Index 2

0 to 255. The DPI PID index used if DPI PID Index Control is set to Use 1 + 2.

Splice Status

Scte104 Messages In

Scte104 Message Error

Scte 35 Messages Out

Pending Splices.

Splice Event Info

Splice <n>

Splice Type

Out of Network

Unique Program ID

Event ID

Time to splice (H)

Time to splice (M)

Time to splice (S)

Time to splice (F)

Stream Output

Embedded PCR

Off, On, On (Picture Header). Sets if the PCR is embedded within the video. If

it is set to other than Off, the PCR PID field of a service will become read only

and will contain the PID of the current component.

Off, On. Sets the copyright flag in the elementary stream header.

Original

Off, On. Sets the original flag in the elementary stream header.

PES Packet Per

GOP, Picture. Determines how PES packets shall be generated. The Picture

option is only available if MPEG 2 encoding is used.

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Search results

Summary of Contents for AVP 4000

Reviews:

Ericsson AVP 4000, Reference Manual, Page: 172 / 422

Search results

Summary of Contents for AVP 4000

Reviews: