manualshive.com logo in svg

Ericsson AVP 4000, Reference Manual, Page: 316 / 422

Share
Download
Ericsson AVP 4000 Reference Manual Download Page 316

 

 

Options, Licensing and Upgrades  

 

7-12 

 

1/1553-FGC 101 1790 Uen Y

  

 

 

 

-  Dolby Digital (56 kbps to 640 kbps) (software option CE/SWO/DOLBY/AC3). 
-  AAC LC/HE-AAC (32 kbps to 192 kbps) (software option CE/SWO/AAC). 
-  Pass-through of pre-encoded Dolby Digital (1 – 5.1 channels). 
-  Pass-through of pre-encoded Dolby E. 
-  Pass-through of uncompressed audio (Linear PCM – SMPTE 302M). 

7.8.7 

Indications 

LEDs are provided to indicate SDI Lock Status. 

7.9 

Software and Firmware Upgrades 

A single Upgrade Wizard is available for the unit and all option cards that can be 

fitted for upgrading the unit software and firmware through the Ethernet control port. 

To install software upgrade, navigate to the folder where the Upgrade Wizard is 

saved, and run the executable file. 

Notes: 

Follow instructions provided with the software upgrade wizard to reduce the 

risk of upgrade failure. 

 

The upgrade process needs approximately 50 minutes to finish. The unit 

automatically reboots during the process. 

 

Following an upgrade, the unit configuration is lost and any stored 

configurations may no longer be compatible with the new software.  A 

configuration converter tool is available to convert existing configurations so 

that they can be re-used.  Refer to instructions provided with the converter 

tool for more information. 

To recover the unit from a failed upgrade, refer to the instructions provided 

with the Upgrade Wizard. 

7.10 

Removal and Replacement of Modules 

This section gives information relating to the handling of option modules as they are 

inserted or removed from the unit. 

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Reviews:

No comments