Ericsson AVP 4000 Reference Manual Download Page 203

Page: 203 / 422

Web GUI Control

1/1553-FGC 101 1790

Uen

5-19

Figure 5.18 Properties Widget

5.4.2

Advanced Setup Tab

The

Advanced Setup

tab provides access to all configuration options of the unit

and consists of the

Advanced Video Processor Settings

and the

Properties

widgets.

Figure 5.19 Advanced Setup Tab

5.4.2.1

Advanced Video Processor Settings Widget

The

Advanced Video Processor Settings

widget displays a tree view of all

configuration items available on the unit organized into different folders for easier

navigation. The properties of the selected node (if any) are displayed in the

Properties

widget.

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Search results

Summary of Contents for AVP 4000

Reviews:

Ericsson AVP 4000, Reference Manual, Page: 203 / 422

Search results

Summary of Contents for AVP 4000

Reviews: