manualshive.com logo in svg

Ericsson AVP 4000, Reference Manual, Page: 315 / 422

Share
Download
Ericsson AVP 4000 Reference Manual Download Page 315

 

Options, Licensing and Upgrades 

 

 

1/1553-FGC 101 1790 Uen Y

 

 

7-11 

 

 

 

•

  3G/HD-SDI Input via an LC optical female connector. 

•

  UHD using 4 off 3G-SDI Inputs via LC female connectors. 

Note:

  SFP Modules are NOT hot-swappable. 

7.8.3 

Video 

•

  SDI video input. 

•

  Frame re-synchronization. 

•

  HD & UHD HEVC, 4:2:0 & 4:2:2 Video Encoding (depending on purchased 

licenses). 

•

  Vertical resolution: 720 or 1080 (HD), 2160 (UHD). 

•

  Horizontal Resolution: 1920 or 1280 (HD), 3840 (UHD). 

•

  Low Delay/Mega Low Delay. 

•

  Bit rate tracking. 

7.8.4 

Input Detection 

The CE-HEVC VCM is capable of detecting if there is a valid video stream available 

at the SDI input. See 

Chapter 3, Getting Started: How to Configure and use Video 

Input detection 

for details. 

7.8.5 

Ancillary Data 

•

  Closed Captions: EIA-608, EIA-708 via SMPTE 334. 

•

  Time Code. 

•

  SMPTE 2016-3 AFD and Bar Data 

•

  HDR/WSS signalling. SDR (BT.709), UHD SDR (BT.2020), HDR HLG10 (HDR 

in VUI), HDR HLG10 (SDR in VUI), HDR PQ10. 

7.8.6 

Audio Compression 

•

  Up to eight channels AES/EBU digital audio input either de-embedded from 

SD/HD-SDI or via the Audio/Data input connector. 

•

  Supported audio coding modes: 

-  MPEG-1 Layer II (32 kbps to 384 kbps) (additional pairs available with 

CE/SWO/M1L2 software option). 

-  MPEG-1 Layer II Phase Aligned Audio (384 kbps) (software option 

CE/SWO/PAA). 

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Reviews:

No comments