Ericsson AVP 4000 Reference Manual Download Page 312

Page: 312 / 422

Options, Licensing and Upgrades

7-8

1/1553-FGC 101 1790 Uen Y

7.6

External Sync Input Option Card

7.6.1

Overview

With the External Sync Input option card the internal 27 MHz System Clock

Reference of the unit can be locked to an external clock source. The synchronizing

signal is input via a 75

Ω

female BNC connector on the rear panel. The unit can be

configured to lock to either a PAL or NTSC black burst signal, or a 1 V peak to peak

10 MHz reference.

If the input is a black burst signal, the horizontal sync information is extracted and

passed to the Host Controller Card. If the input is a 10 MHz clock signal, it is directly

passed to the Host Controller card.

Figure 7.6 External Sync Input Option Card

7.6.2

Interfaces

The External Sync Input option card has the following interface:

•

One 75

Ω

female BNC input connector for connecting a 10 MHz 1V

reference

signal or an analogue video signal.

7.7

GPI Option Card

7.7.1

Overview

The GPI option card supports the following functions:

•

GPI triggered splicing.

•

Alarm relay (not supported in this release).

•

GPI loading of stored configurations (not supported in this release).

•

IEC-232 (RS-232) Data Input (not supported in this release).

Note:

GPI is only supported for manual SCTE-35 insertion.

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Search results

Summary of Contents for AVP 4000

Reviews:

Ericsson AVP 4000, Reference Manual, Page: 312 / 422

Search results

Summary of Contents for AVP 4000

Reviews: