Ericsson AVP 4000 Reference Manual Download Page 258

Page: 258 / 422

Web GUI Control

5-74

1/1553-FGC 101 1790

Uen

The following parameters are available on the

VBI

tab of the

Properties

widget on

the

Service Configuration

page when an ANC stream is selected in the

Outputs

widget. The same parameters can be accessed through the

Advanced/CE-

HEVC/videoGroup/Video 1/Input/VBI Extraction

menu on the front panel.

Table 5.56 Ancillary Data Parameters

Parameter

Values

Description

Description Control

VBI Descriptor Mode

Standard, Legacy, Philips, User

The source for Closed Captions data encoded as part of

the Video Stream (only applicable when Video Frame Rate

is 29.97 Hz)

Closed Captions

Closed Captions Source Off, VBI lines, SMPTE 334

The source for Closed Captions data encoded as part of

the Video Stream. Only applicable when frame rate is

29.97 Hz.

Timecode

TC Mode

Off, External, Zero on Loss, External,

Freewheel on Loss, Internal

Controls what mode the Time code (TC) is working in,

either Off, external source or internally generated. Also

sets what happens on loss of external source (zero or

freewheel).

TC External Source

ANC VITC1, ANC VITC2, ANC LTC

Controls the external source of Time Code. Auto will select

the first source present in order of the drop down list.

TC Dropframes

Off, On, Auto

Only in 525 line operation controls if Time Code takes

account of drop frames or not. Auto configures to external

source, or to ON for internal source.

Generic ANC

Generic ANC Extraction

Off, On

Controls whether Generic ANC is extracted from the SDI

stream or not as per SMPTE 2038-2008.

Max ANC Bit Rate

100 to 2000 kbps

The maximum data rate of the Generic ANC data output.

ANC Component

This section describes the parameters associated with the component carrying

ancillary data.

The following parameters are available on the

Component

tab of the

Properties

widget on the

Service Configuration

page when an ANC stream is selected in the

Outputs

widget. The same parameters can be accessed through the

Output/<output name>/Transport Stream ID: <n>/Service List/<service

name>/Component List/<component name>

menu on the front panel.

Table 5.57 ANC Component Parameters

Parameter

Values

Description

PID

16 to 8190

Sets the packet identifier associated with the component.

Bit Rate Weighting

Fixed

Specifies the weight associated to the component in the

Bit Rate Tracking algorithm. For audio stream, this is Fixed

and read only.

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Search results

Summary of Contents for AVP 4000

Reviews:

Ericsson AVP 4000, Reference Manual, Page: 258 / 422

Search results

Summary of Contents for AVP 4000

Reviews: