Ericsson AVP 4000 Reference Manual Download Page 421

Page: 421 / 422

Logo Creator

1/1553-FGC 101 1790 Uen Y

E-7

The fade setting does not affect the current image. It will only be used when saving

OSD 5 and OSD 6 files when it will be stored in the file for later use.

E.6.4

Image Validation

The size and position of the image is validated on loading, each time the resolution

is changed and each time the position is changed.

If the image is too large for the resolution then a warning will be displayed and the

resolution will be reset to the previous setting except on file loading.

If the image is off screen due to the changes, then a warning will be displayed and

(unless the image has just been loaded) the changed setting will be reset to the

previous setting.

E.6.5

Saving the OSD File

Select

File > Save As

from the menu and select the version of OSD file you wish to

save as from the drop down menu.

OSD 6 files contain all the information on the screen in a binary format. This means

that the files will be smaller and take up less space.

Saving is possible at any time, and it is advisable to save the image often while

editing is in progress. You may also save the file in BMP format, but this file will not

contain transparency information.

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Search results

Summary of Contents for AVP 4000

Reviews:

Ericsson AVP 4000, Reference Manual, Page: 421 / 422

Search results

Summary of Contents for AVP 4000

Reviews: