Ericsson AVP 4000 Reference Manual Download Page 177

Page: 177 / 422

Front Panel Control

1/1553-FGC 101 1790 Uen Y

4-37

Language

The language of the stream when not in dual mono (1+1) mode.

Language (Left)

M1L2 dual mono

Language (Right)

M1L2 dual mono

User Defined Language 1

User Defined Language 2

Audio Stream Type

Main Audio, Clean Effects, Hearing Impaired, Visual Impaired.

MPEG Version

MPEG 1, MPEG 2. Configures if MPEG-1 or MPEG-2 to be signaled.

Off, On. Indicates if the material is copyright protected.

Original

Off, On. Indicates if source is the original or a copy

De-emphasis

Off, 50/15us, CCITT J.17. To meet the MPEG-1 Layer 2 encoding algorithm

specification the audio must not have pre-emphasis applied. If the input signal

does have pre-emphasis applied, a de-emphasis filter must be applied prior to

encoding.

Audio description

Action on control track Loss

Action when silence detected

Silence Threshold

Silence Period

Audio Status

Coding Mode

Indicates the selected audio encoding status.

Bit Rate

Indicates the selected audio bit rate.

Dolby Digital Sample Rate

Indicates the Dolby Digital audio encoding sample rate in Hz.

Dolby Metadata Presets

Dolby Metadata Preset <n>

Preset name

Name of the preset (for user information).

Dialogue Normalization Level

-31 to -1 dB. Used by a decoder to determine the level of adjustment required

to achieve the set level.

Bitstream Mode

Main audio service: complete main, music and effects, Associated service:

visually impaired, Associated service: hearing impaired, Associated service:

dialogue, Associated service: commentary, Associated service: emergency,

Associated service: visually impaired, Associated service: karaoke/voiceover.

Flags the type of service in the bitstream.

Line mode compression profile type

None, Film Standard, Film Light, Music Standard, Music Light, Speech. Alters

the dynamic range for line output.

RF mode compression profile type

None, Film Standard, Film Light, Music Standard, Music Light, Speech. This

alters the dynamic range for RF output. The overall level is raised by 11dB.

Center mix level

0.707 (-3.0 dB), 0.595 (-4.5 dB), 0.500 (-6.0 dB). Indicates the downmix level

when there is no centre speaker. This is applied to left and right channels only.

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Search results

Summary of Contents for AVP 4000

Reviews:

Ericsson AVP 4000, Reference Manual, Page: 177 / 422

Search results

Summary of Contents for AVP 4000

Reviews: