Ericsson AVP 4000 Reference Manual Download Page 5

Page: 5 / 422

Preliminary Pages

1/1553-FGC 101 1790 Uen Y

Issue Date

Software

Version

Comments

May 2015

9.13.x

Updates for software version 9.12.x and

9.13.x. New supported features added.

October 2015

9.16.x

Updates for software version 9.16.x. New

supported features added.

December 2015

9.17.x

Updates for software version 9.17.x. New

supported features added.

February 2016

9.18.x

Updates for software version 9.18.x. New

supported features added.

April 2016

9.19.x

Updates for software version 9.19.x. New

supported features added.

September 2016

9.22.x

Updates for software versions 9.20.x, 9.21.x.

and 9.22.x New supported features added.

November 2016

9.23.x

Updates for software versions 9.23.x New

supported features added.

December 2016

9.24.x

Updates for software versions 9.24.x New

supported features added.

March 2017

9.25.x

Updates for software versions 9.25.x New

supported features added.

April 2017

9.26.x

Updates for software versions 9.26.x New

supported features added.

June 2017

9.27.x

Updates for software versions 9.27.x New

supported features added.

September 2017

9.29.x

Updates for software versions 9.28 and

9.29.x New supported features added.

January 2018

9.31.x

Updates for software versions 9.31. New

supported features added.

Associated Documents

The following manuals/guides are also associated with this equipment:

Ericsson Document Identity

Title

1/1553-FGB 101 752

Video Processing/Stream Processing

Products – Generic Product Information -

Quick Guide

174 02-FGB 101 348

Installation, Safety and Compliance

Information Generic Product Information -

Reference Guide

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Search results

Summary of Contents for AVP 4000

Reviews:

Ericsson AVP 4000, Reference Manual, Page: 5 / 422

Search results

Summary of Contents for AVP 4000

Reviews: