Ericsson AVP 4000 Reference Manual Download Page 57

Page: 57 / 422

Getting Started

1/1553-FGC 101 1790 Uen Y

3-21

3.7.6

How to Configure the Chassis for Multi-screen Functionality

In order to use Multi-screen Encoder functionality, the AVP chassis must have the

relevant software release and be fitted with appropriate option cards fitted in specific

slots. ABR is a licensed feature and the chassis must have one AVP/SWO/ABR/SD

license and optionally one AVP/SWO/ABR/HD license installed for each service.

The slot configuration will depend on which chassis is used.

3.7.6.1

Installing the Option Cards

Install the EI9001/T cards in the slots indicated in

Table 3.4

, depending on what

functionality you want to achieve, and which chassis is being used.

Table 3.4

Installation of Option Cards

Chassis

Type of Services

Slots to Populate

All types of Six Slot Chassis

†

One service comprising of ABR and Multi-

platform

4, 5 and 6

All types of Six Slot Chassis

†

One service comprising of ABR only

5 and 6

All types of Six Slot Chassis

†

Two services each comprising of ABR only

3, 4, 5 and 6

AVP4000/BAS/1AC/ED

Two services each comprising of ABR and Multi-

platform

1, 2, 3, 4, 5 and 6

AVP4000/BAS/1AC/ED

Three services each comprising of ABR only

1, 2, 3, 4, 5 and 6

AVP4000/BAS/2AC

One service comprising of ABR and Multi-

platform

1, 2 and 3
Slot 4 must have a

blanking plate fitted.

AVP4000/BAS/2AC

One service comprising of ABR only

3 and 4

AVP4000/BAS/2AC

Two services each comprising of ABR only

1, 2, 3 and 4

†

Only an AVP4000/BAS/1AC/ED can be populated with up to six EI9001 or EI9001T cards. All other six-slot-chassis

can only be populated with up to four EI9001 or EI9001T cards.

3.7.6.2

Configuring the Option Cards

Card “roles” are a software configurable option that must be set up via the web GUI.

Each card must be given the correct card role to gain access to the required

functionality.

It is recommended that the unit is free of all output Transport Streams and Services

before proceeding. To configure the card roles, the following procedure must be

followed.

Table 3.5

shows the roles that particular cards are to take given the

required services and chassis in use.

To configure the option cards:
1. Select the appropriate slot on the

Device Configuration > Advanced Setup

page, and select the

EI9001T > Build

folder.

2. Set the appropriate Card Role in the

Properties

panel.

3. Repeat for all the cards in the chassis, and select

Apply All

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Search results

Summary of Contents for AVP 4000

Reviews:

Ericsson AVP 4000, Reference Manual, Page: 57 / 422

Search results

Summary of Contents for AVP 4000

Reviews: