Ericsson AVP 4000 Reference Manual Download Page 375

Page: 375 / 422

Technical Specification

1/1553-FGC 101 1790 Uen Y

B-9

Table B.8 Video Resizing (HD) Specification

25 Hz input format

29.97 Hz input format

Process

Comment

1920x1080@25 (pass-

thru)

[email protected] (pass-

thru)

Scale 1/1

1440x1080@25

[email protected]

1280x720@50 (pass-

thru)

[email protected] (pass-

thru)

Scale 1/1

960x720@50

[email protected]

Video Profiles

Depending on the option module fitted, the following video profiles are supported.

Table B.9 Video Profiles (HD) Specification

Profile

Available on Option Module

Profile

H.264

HD Main Profile Level 4.0 4:2:0 8 bit

EI9001

AVP/SWO/MP4 and AVP/SWO/HD

HD High Profile Level 4.0 4:2:0 8-bit

EI9001

AVP/SWO/MP4 and AVP/SWO/HD

MPEG-2

HD Main Profile High Level 4:2:0:8: bit

EI9001

AVP/SWO/MP2 and AVP/SWO/HD

B.3.6.3

SD Video Formats

Active Video Start Line

The active video starts on line 23 for both the 525-line and the 625-line system

(SMPTE RP 202-2000).

Video Input

When encoding into SD resolution, the unit supports the input of video at 720x576

25 Hz, 1280x720 50 Hz, 1920x1080 25 Hz, 720x480 29.97 Hz, 1280x720 59.94 Hz,

and 1920x1080 29.97 Hz.

Video Resizing

The following re-sampling of any input format is supported on the VCM cards.

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Search results

Summary of Contents for AVP 4000

Reviews:

Ericsson AVP 4000, Reference Manual, Page: 375 / 422

Search results

Summary of Contents for AVP 4000

Reviews: