Ericsson AVP 4000 Reference Manual Download Page 281

Page: 281 / 422

Advanced Video Processing and Networking

1/1553-FGC 101 1790 Uen Y

6-7

6.1.5

UDP Layer

The UDP layer is according to RFC768 User Datagram Protocol. The user can

control the target UDP port number for the MPEG-2 stream. A configurable number

of 188 byte long MPEG-2 TS packets are mapped straight into an UDP frame with

no additional overhead. The MTU for Ethernet is usually 1500 bytes. This limits the

number of MPEG-2 TS packets per UDP frame to lie within 1 to 7. The following

illustration shows the mapping of MPEG-2 Transport Streams into UDP packets.

Figure 6.3 Mapping of MPEG-2 TS Packets

6.1.6

IP Layer

The IP layer is according to RFC791 Internet Protocol Specification. The user is

allowed access to the following IP header fields: IP source address, IP destination

address, Time-To-Live field, Type-Of-Service field. Performing static mapping

between class-D IP addresses and the corresponding Ethernet multicast MAC

addresses supports limited IP Multicasting (Type 1).

6.1.7

Ethernet Layer

The data link layer is Ethernet according to IEEE 802.3/802.3u (auto sensing

10/100 Mbps, Twisted Pair, RJ-45 connector).

6.1.8

IP Overhead

The IP overhead calculation when mapping MPEG-2 TS packets into IP frames is

shown in

Table 6.1

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Search results

Summary of Contents for AVP 4000

Reviews:

Ericsson AVP 4000, Reference Manual, Page: 281 / 422

Search results

Summary of Contents for AVP 4000

Reviews: