Ericsson AVP 4000 Reference Manual Download Page 102

Page: 102 / 422

Getting Started

3-66

1/1553-FGC 101 1790 Uen Y

Figure 3.56 BISS Security Level Selection

3.7.26.2

BISS Key Entry

The unit supports the use of 31 keys for BISS, which are stored in a memory table

on the unit, with the location identified as BISS Key 1 to BISS Key 31.

Each required key must be entered into the table by the user, and once entered, the

key value is not visible and there is no means of reading the value.

The key may be entered or edited via the browser when applying BISS to an output

service from the

Service Configuration

tab.

Figure 3.57 BISS Key Entry

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Search results

Summary of Contents for AVP 4000

Reviews:

Ericsson AVP 4000, Reference Manual, Page: 102 / 422

Search results

Summary of Contents for AVP 4000

Reviews: