manualshive.com logo in svg

Ericsson AVP 4000, Reference Manual, Page: 128 / 422

Share
Download
Ericsson AVP 4000 Reference Manual Download Page 128

 

 

Getting Started  

 

3-92 

 

1/1553-FGC 101 1790 Uen Y

  

 

 

 

 

Figure 3.76  Input Detection Configuration 

Operation 

If no source is connected or the input source is not recognized then Not Detected is 

reported as the detected video standard, a video lock alarm is raised and the output 

on video loss setting will apply. 

If the VCM can lock to the new input, a change in the input format the detected 

standard will be displayed and the selected configuration file for the detected format 

is applied. 

Note:

  ONLY the video, audio, VANC and VBI configuration parameters from the 

stored configuration for the associated options card are applied in this case.  

All other cards and base unit parameters remain unaffected. 

If the video is embedded in a Transport Stream for which Bit Rate Tracking Mode is 

set to Maximize Video, and the Bit Rate Weighting for the video component is set to 

other than Fixed or Minimal, then the Video Bit Rate might also get updated. For 

more information, see Operation and Control > Bit Rate Tracking. Some examples 

are also given below: 

•

 

Source

 changed from 

HD to SD

, and 

Profile for SD

 input is set to 

SD MPEG-2 

Main Profile Main Level 4:2:0 8 bit:

 The new encoding profile is SD MPEG-2 

Main Profile Main Level 4:2:0 8 bit. The bit rate is limited to 15 Mbps (maximum 

allowed by profile) if it was higher than 15 Mbps before the change. Otherwise 

the bit rate is not affected. 

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Reviews:

No comments