Ericsson AVP 4000, Reference Manual, Page: 112 / 422

Getting Started
3-76 1/1553-FGC 101 1790 Uen Y
Note: If you click on Audio Stream 1 in the Inputs widget, the corresponding
audio stream will be highlighted in grey in the Outputs widget.
4. In the Properties widget, click on the Input tab, and set the Input Format to
Uncompressed LPCM .
5. Set the Input Source to Embedded 1 (SDI 1).
Figure 3.70 PAA - Setting Input Sources
6. Click on the
Encode
tab and set the
Coding Standard
to
MPEG Layer II
.
Figure 3.71 PAA - Setting Coding Mode
The other components of the same group will be automatically configured.
7. If you are setting up dual PAA encoding, repeat steps 1-4 for
Audio 9 - Audio
11 (for 6 channel aligned) or Audio 9 - Audio 12 (for 8 channel aligned).
8. If dual PAA encoding is used, then for the second PAA encoded group set the
Input Source to the first embedded pair relevant to the second group. This may
be Embedded 4 (SDI) or higher. The remainder of the configuration for the
second group is the same as for the first group (steps
5
and
6
).