Ericsson AVP 4000 Reference Manual Download Page 29

Page: 29 / 422

Installing the Equipment

1/1553-FGC 101 1790 Uen Y

2-3

2.1

Read This First!

Please refer to the Installation,

Safety and Compliance Information for Ericsson

Compression Products Reference Guide

supplied with your product for full details of

installation requirements. This guide only contains additional product specific

information where required.

2.2

Mounting and Ventilation

2.2.1

Fixing and Rack Mounting

The equipment is designed for fixed use only and has been shipped with fixing

brackets suitable for a standard 19-inch rack. When installed in a rack, it should be

secured using the fixing brackets. In addition, support shelves must be used to

reduce the weight on the brackets. Ensure it is firmly and safely located and it has

an adequate free-flow of air.

Slide the unit onto the chassis supports and affix to the rack by means of an

M6 x 18 mm panhead screw in each corner.

A freestanding unit should be installed on a secure horizontal surface where it is

unlikely to be knocked or its connectors and leads disturbed.

2.2.2

Ventilation

Side openings in the unit, as well as side-mounted cooling fans, are provided for

ventilation. They ensure reliable operation of the product and protect it from

overheating. The openings of the fans must not be blocked or covered.

Figure 2.1 Air-Flow through the Equipment

Air is released

through vents at

the side of the unit.

Fans are

mounted on

this side of

the unit

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Search results

Summary of Contents for AVP 4000

Reviews:

Ericsson AVP 4000, Reference Manual, Page: 29 / 422

Search results

Summary of Contents for AVP 4000

Reviews: