Commodore Amiga A1000, Hardware Reference Manual

Page: 301 / 380

FAT AGNUS PIN ASSIGNMENT
PIN DESIGNATION FUNCTION DEFINITION
01-14 RD1S-RD2 Register bus lines 15 to 2 I/O
17 INT3* Blitter ready interrupt O
18 DMAL Request audio/disk DMA I
18 RD1 Register bus line 1 I/O
18 RST* Reset I
19 BLS* Blitter slowdown I
20 DBR* Data bus request O
21 RRW DRAM Write/Read O
22 PRW Processor Write/Read I
23 RGEN* RG Enable I
24 AS* Address Strobe I
25 RAMEN* RAM Enable I
26-33 RGA8-RGA1 Register address bus 8-1 O
34 28MHZ Master clock I
35 XCLR Alternate master clock I
36 XCLKEN* Master clock enable I
37 CDAC* Inverted shifted 7MHZ clk O
38 7MHZ 28MHZ clk divided by four O
39 CCRQ Color clock delay O
40 CCR Color clock O
41 TEST Test - access registers I
43-51 MA0-MA8 Output bus lines 0 to 8 O
52 LDS* Lower data strobe I
53 UDS* Upper data strobe I
54 CASL* Column addr strobe lower O
55 CASU* Column addr strobe upper O
56 RAS1* Row address strobe one O
57 RAS0* Row address strobe zero O
59-77 A19-A1 Address bus lines 19 to 1 I
78 LP* Light pen O
79 VSY* Vertical synch I/O
80 CSY* Composite video synch O
81 HSY* Horizontal synch I/O
84 RD0 Register bus line 0 I/O
- 292 Appendix C -