Beckman Coulter Multisizer 4, User Manual

Page: 202 / 238

PN A51387A
B
8-16
Configuring Software and Security
Customizing Security Settings
• Enter the Beckman Coulter Multisizer 4 Smart Technology Beaker size, which prompts the
Analyzer to move the stirrer into the ideal position for uniform particle distribution.
• Prompt the software to load the Beckman Coulter ST Aperture Tube size, serial number, and Kd
value after the tube has been calibrated.
• Enter sample information automatically.
To configure the Bar Code Reader:
1. Select
Configuration > Bar Code Reader Configuration
on the Main Menu bar. The Bar Code
Reader Configuration window opens.
If you are running security mode, select
Bar Code Reader Configuration
in the Administrator or
Supervisor drop-down menu.
2.
In the Bar Code Reader Configuration window, select Use the Bar Code Reader.
3. Select a port from the Port drop-down list. Because the software maps USB to COM ports, the
correct port may be difficult to determine. If necessary, select COM ports sequentially until you
locate the correct port.
4.
In the Symbologies pane, select Aztec and Data Matrix. Select additional UPC symbologies only
if you will be using the Bar Code Reader to scan sample packets that you know use the specific
UPC symbologies. Click
(
OK
)
.
Customizing Security Settings
You can run the Multisizer 4 with no security or one of four levels of password-protected security.
With the exception of 21 CFR Part 11 security, the administrator determines the user privileges that
will be associated with each security level (Low, Medium, or High).
When selected, 21 CFR Part 11 security ensures that all settings meet the requirements of the
Electronic Records and Electronic Signatures Rule (21 CFR Part 11). The FDA established the Rule to