manualshive.com logo in svg

Avaya Communication Manager Contact Center, Manual, Page: 349 / 452

Share
Download
Avaya Communication Manager Contact Center Manual Download Page 349

VuStats Display Format (Category A only)

Issue 1.0 May 2003

349

oldest-calling-waiting

The time the oldest call has been waiting in 
the VDN. Timing begins when the call enters 
the vector.

VDN Status: OLDEST 
CALL

percent-in-service- level

The percentage of calls offered to the VDN 
that were answered within the service level 
administered for the VDN.

VDN Status/VDN 
Report/VDN Summary 
Report: % IN SERV 
LEVL

total-acd-talk-time

The total time agents spent talking on 
split/skill calls and direct agent calls.

None

vdn-extension

The extension of a vector directory number 
(VDN).

VDN Status/VDN 
Report: VDN EXT

vdn-name

The name of a vector directory number (VDN).

VDN Status/VDN 
Summary Report: VDN 
NAME

VDN data types (continued)

VuStats data type

Description

BCMS report: field 
name/column heading

Trunk group data types

VuStats data type

Description

BCMS report: field 
name/column heading

average-incoming-
call-time

Average holding time for incoming trunk calls.

Trunk Group: 
INCOMING TIME

average-outgoing-call-
time

Average holding time for outgoing trunk calls.

Trunk Group: 
OUTGOING TIME

incoming-abandoned-
calls

Incoming calls abandoned during a specified 
time period for a specified trunk group. 

Trunk Group: 
INCOMING ABAND

incoming-calls

Incoming calls carried by a specified trunk 
group.

Trunk Group: 
INCOMING CALLS

incoming-usage

The total trunk holding time for incoming calls 
in hundred call seconds.

Trunk Group: 
INCOMING CCS

number-of-trunks

The number of trunks in a specified trunk 
group.

Trunk Group: Number of 
Trunks

outgoing-calls

The number of outgoing calls carried by a 
specified trunk group.

Trunk Group: 
OUTGOING CALLS

outgoing-completed- calls

The number of outgoing calls that received 
answer supervision or answer timeout.

Trunk Group: 
OUTGOING COMP

Summary of Contents for Communication Manager Contact Center





































































































































































































































































































































































































































































Reviews:

No comments