Best Service Routing (Category A only)
Issue 1.0 May 2003
105
Trunk group — continued
In the page example shown above, the administrations settings must conform to the
following requirements:
●
The
NCA-TSC Trunk Member:
field must specify a trunk group member.
Trunk group — continued
In the page shown above, the administrations settings must conform to the following
requirements:
●
The group member used to make the BSR status polls (which is also specified in the
NCA-TSC Trunk Member:
field on page 2 of this form) must be associated with the
appropriate signaling group. The signaling group is specified in the
Sig Grp
column.
display trunk-group 32 Page 2 of 22
TRUNK FEATURES
ACA Assignment? n Measured: none Wideband Support? n
Internal Alert? n Maintenance Tests? y
Data Restriction? n NCA-TSC Trunk Member: 1
Send Name: y Send Calling Number: y
Used for DCS? n Hop Dgt? n
Suppress # Outpulsing? n Numbering Format: public
Outgoing Channel ID Encoding: preferred UUI IE Treatment: service-provider
Replace Restricted Numbers? n
Replace Unavailable Numbers? n
Send Connected Number: n
Send UCID? y
Send Codeset 6/7 LAI IE? n
Path Replacement with Retention? n
Path Replacement Method: better-route
Network (Japan) Needs Connect Before Disconnect? n
display trunk-group 32 Page x of 22
TRUNK GROUP
Administered Members (min/max): 1/4
GROUP MEMBER ASSIGNMENTS Total Administered Members: 4
Port Code Sfx Name Night Sig Grp
1: T00089 32
2: T00090 32
3: T00091 32
4: T00092 32
5:
6:
