Best Service Routing (BSR) Application Plan (Category A only)
Issue 1.0 May 2003
289
BSR application plan form
BSR Application field descriptions
Make assignments as required for the following fields on the form:
Number
This display-only field shows the identifying number of the plan you’re working with.
Numbered from 1 to 255.
Name
Give the application plan a name with up to 15 characters.
Maximum Suppression Time
Enter the maximum poll suppression time in seconds from 0-60. This value applies when a
subsequent Call Vector consider command replaces a location as the best. For example, if
the poll suppression time is set to 30 seconds, the remote location polling is suppressed
for up to 30 seconds if the adjusted Expected Wait Time (EWT) is very far from being the
best.
Lock
When set to y, this field provides extra security by not sending the information over the
CMS. When set to n, the system sends the information.
Num
Enter the location number. Location numbers are identifiers, and therefore need not be in
sequential order. For example, you could assign locations with the identifiers 1, 3, 14 and
89 to one application plan.
Location Name
Give each location a name with up to 15 characters.
Switch Node
This is an optional field. If you’re using Universal Call ID, enter the UCID Network Node ID
for each switch. Valid Network Node IDs range from 1–32,767.
BEST SERVICE ROUTING APPLICATION
Number: 1
Name: International
Maximum Suppression Time: 60
Lock? y
Num
Location Name
Switch Node
Status Poll VDN
Interflow VDN
Net Redir?
1
Denver
320
95022011
3035389425
y
2
New Jersey
18
95022111
2038053552
y
3
New York
12245
95032211
95032221
n
