Network Call Redirection (NCR) (Category A only)
Issue 1.0 May 2003
189
Signaling Group form: NCT
For NCD, the
Network Call Transfer
field on the Signaling Group form must be set to
n. Refer to the following figure:
Signaling Group form: NCD
Call Vector form
For non-BSR applications or for standard or enhanced Look-Ahead Interflow applications
replaced by NCR, supplementing BSR applications, on the communication server Call
Vector form, the left-most two character positions (before the number) in the
route-to
vector step (vector step 2 in the example on the next page) must be set to
~r
to invoke
NCR.
change signaling-group 4 Page 1 of 5
SIGNALING GROUP
Group Number: 4
Associated Signaling? y Max number of NCA TSC: 0
Primary D-Channel: 01B1024 Max number of CA TSC: 0
Trunk Group for NCA TSC:
Trunk Group for Channel Selection:
Supplementary Service Protocol: a Network Call Transfer? y
change signaling-group 4 Page 1 of 5
SIGNALING GROUP
Group Number: 4
Associated Signaling? y Max number of NCA TSC: 0
Primary D-Channel: 01B1024 Max number of CA TSC: 0
Trunk Group for NCA TSC:
Trunk Group for Channel Selection:
Supplementary Service Protocol: a Network Call Transfer? n
