Altigen ACM 6.7 Administrator'S Manual Download Page 422

Page: 422 / 470

Trace Collector

408

MAXCS ACM 6.7 Administration Manual

The following describes the fields in the Trace Collector:

Time Period for Extension Feature #66

: Defines how many hours you want to go

back to collect trace, starting from the time you press

#66

. The default value is 2 hours.

Case Number

: Enter the AltiGen case number associated with this trace collection

activity. The case number will comprise the first part of the file name of the collected
trace package.

Problem Description

: Enter a description of the problem, including the extension

number involved, the time when the problem happened, how to reproduce the problem,
and so on.

Time Range

: The tool collects the trace between the time ranges. The time range

covers before

and

after the defined Date and Time. The default Date and Time is one

hour before the current date and time, and the default variation is 60 minutes. This
setting is not applicable when

#66

is performed.

Trace Category

: By default, all options are selected.

•

Main MAXCS Trace

(\AltiServ\log)

Collects the following files, and extracts the trace records that fall in the specified
time range:

actrace.log

AlpErrLog.txt

SIPlog.txt

ALPxxx.txt

\atps\threadID.txtl

SIPMan.txt

altiserv.txt

\atps\cmdlog.txt

SIPPstnReg.txt

Summary of Contents for ACM 6.7























































































































































































































































































































































































































































































Search results

Summary of Contents for ACM 6.7

Reviews:

Related manuals for ACM 6.7

Brands by name

Popular brands

Altigen ACM 6.7, Administrator'S Manual

Search results

Summary of Contents for ACM 6.7

Reviews:

Related manuals for ACM 6.7

Brands by name

Popular brands