Altigen ACM 6.7, Administrator'S Manual

Page: 141 / 470

Triton T1/E1 Trunk Properties
MAXCS ACM 6.7 Administration Manual 127
Note: In order for back-to-back T1 and tie trunk T1 configurations to perform properly,
it is recommended that you use the system’s default incoming call sequences:
Caller ID and DID Incoming Sequence Example
The following is an example of a Caller ID and DID/DNIS incoming sequence window.
Incoming
sequence
Select up to five incoming symbols to collect from the Caller ID or
DID digits:
•
None
•
#
• *
•
# or *
•
Caller ID
•
DID/DNIS
Selecting None in any field of the sequence will terminate the
sequence and automatically disable subsequent entries in the
sequence.
The default sequence is:
“# or *”
(and then) “
Caller ID
” (and then) “
# or *”
(and then) “
DID/DNIS”
Or Sets up an additional, alternative sequence. You can select another
set of up to five incoming symbols to collect.
Not checking any box is equivalent to checking
None in the first
field.
The default sequence is:
“
DID/DNIS”
Apply to If appropriate, you can use this button, as described in
“Configuring One or Multiple Trunks” on page 117, to apply the
Caller ID Collection to multiple T1 trunks.
Parameter Description