Altigen ACM 6.7, Administrator'S Manual

Page: 178 / 470

Configuring the MAX1000/2000 Board
164 MAXCS ACM 6.7 Administration Manual
If you have two or more HMCP Media servers, the system will provide failover in the
event that one Media server is off-line. When the Home Media server for an IP extension
is not available, the media manager in the system will search available resources from
other Media servers when that extension requests media service. This will happen
atomatically (no configuration required) and dynamically (the resource may come from
a different Media server each time that extension requests a media resource).
Configuring the MAX1000/2000 Board
The MAX1000/2000 Server is a telecom appliance that consists of an embedded DSP
board and two access board slots. MAXCS treats the entire MAX system as one board
with two access board options. The Boards window displays the name of the MAX board,
followed by [xxyy(-T1),xxyy]:
Figure 87. Boards View showing MAX board
xx
refers to the number of analog trunks, and
yy
refers to the number of analog
extensions. If an access board has a T1/E1 port,
-T1
is added to the end.
In the Boards window, double-click the MAX 1000/2000 board to open the main Board
Configuration window:
Figure 88. Board Configuration window
The Channel Group Info panel shows the channel groups (groups of channels that
belong to the same type). For example, if one 4x4xT1 access board and one 4x8 access
board are installed in the MAX 1000/2000 main board, there will be three channel groups
for the 4x4xT1 card, and two channel groups for the 4x8. When one of the channel
groups is selected, the
Channel Mapping List reflects the selection.