Altigen ACM 6.7, Administrator'S Manual

Page: 350 / 470

Working with Servers in the Domain
336 MAXCS ACM 6.7 Administration Manual
3. The System ID of this slave should be the same as it was before it became
disconnected from the domain. (This ID is set in MaxAdmin: in System
Configuration > General tab.)
4. In Enterprise Manager, Global Server Location panel, select the slave and click the
Rejoin button to synchronize the slave with the domain.
A dialog box opens.
5. Input the address and member key, and click OK .
Setting an Alternate Server for AltiGen IP Phones
In a VoIP domain, you can set an alternate server to which global AltiGen IP phones will
be registered when their own server (primary server) experiences a problem that
interrupts phone service. The IP phones will register to the alternate server. This applies
to a workgroup, as well. Switchover must be enabled for the individual IP phones/groups
in Enterprise Manager (
User button > Resolve tab). But before you can do this, you
must set an alternate server.
Note:
Because of its role in the domain, the domain master cannot use this feature.
Note:
This feature does not apply to extensions using IPTalk.
Note:
Make sure the alternate server has enough licenses, such as agent licenses,
station licenses, and so on.
To set an alternate server,
1. Click the
Servers button, and then the Information tab.
2. In the AltiGen IP Phone Redirect panel at the bottom of the tab, check Enable
Switchover to Alternate Server.