Agilent Technologies J-BERT N4903B, User Manual, Page: 75 / 572

Loading Patterns Directly from the Pattern Editor
After you have finished editing a pattern in the pattern editor, you can load this
pattern directly to the pattern generator and error detector.
N O T E
Keep in mind that your modifications in the Pattern Editor do not affect the pattern
at the pattern generator or error detector until you download the pattern to the
pattern generator/error detector.
1 First determine whether the pattern generator and error detector should use
the same pattern. Click
Pattern Select
menu item from the
Pattern
submenu.
The
PatternSelectForm
dialog box opens.
2
Select
Error Detector Pattern tracks the Pattern Generator Pattern
if you want
both modules to receive the same pattern.
3 Click
OK
to close this dialog box.
4
The pattern editor now displays the following buttons in the toolbar:
If you chose that both the error detector and pattern generator use the same
pattern:
Loads the current pattern to both
the pattern generator and error
detector.
If you allowed different patterns for the two modules:
Loads the current pattern to the
pattern generator.
Loads the current pattern to the
error detector.
Captures data of specified length
from the error detector.
Setting up Patterns
3
Agilent J-BERT N4903B High-Performance Serial BERT 75