ZF Marine ClearCommand 9000 Series, Инструкция по установке, эксплуатации и устранению неисправностей, Страница: 207 / 272

TROUBLESHOOTING
PageB8-2
26 Station No.4
Faulted Low
Station No.4 Control Head’s lever position is out of range.
The input appears to be too low.
27 Station No.5
Faulted Low
Station No.5 Control Head’s lever position is out of range.
The input appears to be too low.
28 Station No.6
Faulted Low
Station No.6 Control Head’s lever position is out of range.
The input appears to be too low.
29 Station No.7
Faulted Low
Station No.7 Control Head’s lever position is out of range.
The input appears to be too low.
30 Station No.8
Faulted Low
Station No.8 Control Head’s lever position is out of range.
The input appears to be too low.
31 Station No.9
Faulted Low
Station No.9 Control Head’s lever position is out of range.
The input appears to be too low.
32 Station No.10
Faulted Low
Station No.10 Control Head’s lever position is out of range.
The input appears to be too low.
33 Station No.1
Button Stuck Closed
Station No.1 Control Head’s Transfer Button has either been closed too long or
has been closed since power-up.
34 Station No.2
Button Stuck Closed
Station No.2 Control Head’s Transfer Button has either been closed too long or
has been closed since power-up.
35 Station No.3
Button Stuck Closed
Station No.3 Control Head’s Transfer Button has either been closed too long or
has been closed since power-up.
36 Station No.4
Button Stuck Closed
Station No.4 Control Head’s Transfer Button has either been closed too long or
has been closed since power-up.
37 Station No.5
Button Stuck Closed
Station No.5 Control Head’s Transfer Button has either been closed too long or
has been closed since power-up.
38 Station No.6
Button Stuck Closed
Station No.6 Control Head’s Transfer Button has either been closed too long or
has been closed since power-up.
Error
No.
Title Description
39 Station No.7
Button Stuck Closed
Station No.7 Control Head’s Transfer Button has either been closed too long or
has been closed since power-up.
40 Station No.8
Button Stuck Closed
Station No.8 Control Head’s Transfer Button has either been closed too long or
has been closed since power-up.
41 Station No.9
Button Stuck Closed
Station No.9 Control Head’s Transfer Button has either been closed too long or
has been closed since power-up.
42 Station No.10
Button Stuck Closed
Station No.10 Control Head’s Transfer Button has either been closed too long or
has been closed since power-up.
43 CAN Communication
Stuffing Error
The Control-Area-Network protocol has detected an error in communication
with other devices on the network. The error type is a stuffing error.
44 CAN Communication
Form Error
The Control-Area-Network protocol has detected an error in communication
with other devices on the network. The error type is a form error.
45 CAN Communication
Acknowledge Error
The Control-Area-Network protocol has detected an error in communication
with other devices on the network. The error type is an acknowledge error.
46 CAN Communication
Bit 1 Error
The Control-Area-Network protocol has detected an error in communication
with other devices on the network. The error type is a Bit 1 error.
47 CAN Communication
Bit 0 Error
The Control-Area-Network protocol has detected an error in communication
with other devices on the network. The error type is a Bit 0 error.
48 CAN Communication
CRC Error
The Control-Area-Network protocol has detected an error in communication
with other devices on the network. The error type is a CRC error.
49 CAN Communication
Bus Error
The Control-Area-Network protocol has detected an error in communication
with other devices on the network. The error type is a Bus failure error. The
error cannot be recovered from without cycling power to the Processor.
50 Comm. Error Time-out
System 1
Communication with System 1 has been too long without a Refresh message.
51 Comm. Error Time-out
System 2
Communication with System 1 has been too long without a Refresh message.
52 Comm. Error Time-out
System 3
Communication with System 1 has been too long without a Refresh message.
53 Comm. Error Time-out
System 4
Communication with System 1 has been too long without a Refresh message.
54 Comm. Error Time-out
System 5
Communication with System 1 has been too long without a Refresh message.
55 SE Communication Error Communication with the Station Expander has been too long without a Refresh
message.
56 High Battery Voltage Fault The applied battery voltage is 30VDC or higher for at least two seconds.
57 Low Battery Voltage Fault The applied battery voltage is 10VDC or lower for at least two seconds.
58 Reset Due to Software
Watchdog
The system has had an unexpected Reset, due to a software/ hardware fault.
59 Reset Due to Software Fault The system has had an unexpected Reset, due to a software fault.
Table B8-6: Basic Control System Error Codes