6-9
TI71M01D06-01EN 3rd Edition: 2012.12.01
List of Logic I/O Contact Input Signals (Block 4 ~ Block 5)
: Frequently
used
signals
Δ
:
Signals assigned as necessary
No mark: Not applicable
Logic I/O
Contact input
Abbreviated signal
name
Signal name
Table data op
era
tion
Jog move
Description
I/O pr
ocessing cycle
Block bit
Block 4
0 IN_POSW.0
Coin width
selection 0
Δ
This signal selects the coin width. The table below lists valid
#parameters corresponding to the setting status of IN_POSW.
When performing table data operation, the settling width set in
the table data becomes valid and the input status from this
signal is not reflected.
L
1 IN_POSW.1
Coin width
selection 1
Δ
2 IN_POSW.2
Coin width
selection 2
Δ
3 (reserve)
(Reserved)
4 (reserve)
(Reserved)
5 (reserve)
(Reserved)
6 (reserve)
(Reserved)
7 (reserve)
(Reserved)
Block 5
0 IN_PRM_WR_REQ
#parameter write
request input
This signal is used for the #parameter write function in the
CC-Link interface.
L
1 IN_PRM_RD_REQ
#parameter/#monit
or read request
input
This signal is used for the #parameter/#monitor read function
in the CC-Link interface.
L
2
IN_MON_A_CHNG_REQ
#parameter/#monit
or display A
change request
input
This signal is used for the #parameter/#monitor display A
function in the CC-Link interface when 2 stations are occupied.
L
3
IN_MON_B_CHNG_REQ
#parameter/#monit
or display B
change request
input
This signal is used for the #parameter/#monitor display B
function in the CC-Link interface when 2 stations are occupied.
L
4 (reserve)
(Reserved)
5 (reserve)
(Reserved)
6 (reserve)
(Reserved)
7 (reserve)
(Reserved)
Selected #parameter
IN_POSW.
No.
Name 2
1
0
#90 Coin
width
#0
OFF OFF OFF
#91 Coin width #1
OFF OFF
ON
#92 Coin width #2
OFF
ON
OFF
#93 Coin width #3
OFF
ON
ON
#94 Coin width #4
ON
OFF OFF
#95 Coin
width
#5
ON OFF ON
#96 Coin width #6
ON
ON
OFF
#97 Coin width #7
ON
ON
ON