Appendix 4-8
TI71M01D06-01EN 3rd Edition: 2012.12.01
Repeatability Accuracy
Positioning is repeated seven times from the same rotation direction. This value is displayed
after adding a sign to a half of the maximum width value of variations of the seven
positions.
Restore
Writing backed up data from an upper device (PC, operation display pendant) to the drive.
Same as download.
Rotation Coordinate System
A coordinate system in which the coordinate values after one motor rotation becomes equal
to the coordinate values before movement. The coordinate system does not overflow even if
the motor is continuously rotated in the same direction.
Rotor Core
A magnetic circuit provided in the motor's rotating part
Rotor Inertia
Inertial moment around the rotor's rotation axis of the motor. Self-inertia.
RxD
Receive signal during host communication
S
Scaling
Scale factors specified by the #112 and 113 parameters, which are used for conversion
between pulse units and command units.
Settling Time
A delay occurs in the actual motion of the motor in response to a position command. Upon
executing a position command, the difference in time until a settling signal is output is
specifically called the settling time.
Setup Dependency
The allowable setup range of the maximum and minimum values of a parameter changes
according to the setup values of other parameters
SIG0 and SIG1 signals
Analog velocity signals generated by an encoder signal
Skew
Variations in the phases among signals
Slave
It refers to the driven motor/drive in a master and slave relation in tandem operation.
Software Drive Reset
Restarting the drive by a command issued by the utility software, operation display
panel/pendant, etc. This function is equivalent to cycling of the power.
Start Option
Command arguments
Startup Operation
Table operation executed automatically when the power is turned ON according to settings.