8-37
TI71M01D06-01EN 3rd Edition: 2012.12.01
8.6.3 I/O
This section describes the settings of the following items pertaining to logical I/O inside the
drive (hereafter called logic I/O) and physical I/O actually embedded in the drive (hereafter
called hard I/O).
[1]
Hard I/O assignment
[2]
Hard I/O logical setting
[3]
Logic I/O initial value setting
Hard I/O Assignment and Hard I/O Logical Setting Window
Select a setting to hard I/O.
Select I/O to be set.
Up to 16 bits can be displayed at a time. If there are
more than 16 bits, switch using this combo box.
Indicates that hard I/O with a check mark has been
set to positive logic (Active High).
Select the logic I/O name to be assigned from the list for each hard I/O. However,
the logic I/O names that are already selected by other bits cannot be selected.