Woodward easYgen-3000XT Series, Руководство пользователя

Страница: 730 / 1205

WAGO Analog Inputs (2 x AI or 4 x AI)
Type P/N two channel
version P/N four
channel
version "Wire break" detection TYPE: Settings
Thermocouple
(K, T, J, E, S, L)
750-469xxx
(standard format)
Overrun
Underrun: (approx. -49.8
°C)
TC Type x Sender type:
Thermocouple
Notes
If adjustable variant
(750-469/003-000) is used:
use “Wago-I/O-CHECK” to
adjust (default Type is "K").
For details refer to
╚═▷
“Configurable WAGO
devices”
+/- 120 mV 750-469/000-003 no Linear or table Sender
type: Thermocouple
WAGO Analog Inputs (8 x AI)
Type P/N eight channel
version "Wire break" detection TYPE: Settings
RTD 750-451 depends on the configured
type TYPE and Sender type: according to the type
configured by “Wago-I/O-CHECK”
Use “Wago-I/O-CHECK ” to configure the
different channels (Default type is PT100). For
details refer to
╚═▷ “Configurable WAGO
devices” .
0/4 – 20 mA 750-496 4-20 mA: Underrun
0-20 mA: no detection
TYPE: Linear or table Sender type: 4-20 mA or
0-20 mA
Use “Wago-I/O-CHECK ” to configure the
different channels (Default type is 4-20 mA).
For details refer to
╚═▷ “Configurable WAGO
devices” .
Thermocouple 750-458 Overrun
Underrun (approx. -49.8
°C)
TYPE: depends on the configured type Sender
type: depends on the configured type
Note: if adjustable variant (750-469/003-000) is
used use “Wago-I/O-CHECK ” to adjust (Default
type is K). For details refer to
╚═▷
“Configurable WAGO devices” .
WAGO Analog Outputs (2 x AO or 4 x AO)
Type P/N two channel
version P/N four
channel
version Comments Settings
0-20 mA 750-552 750-553 Selected hardware type =
mA
0-10 V 750-560,
[10 bit (100 mW)]
750-550
750-559 Selected hardware type =
"V"
WAGO Digital Inputs/Outputs (2 ... 16 x DI/DO)
# of DIs 2 x DI 4 x DI 8 X DI 16 X DI
730 easYgen-3000XT Series B37574
6 Application Field
6.3.10 Setup Expansion Modules at CAN 2
Released