Woodward easYgen-3000XT Series, Руководство пользователя

Страница: 105 / 1205

Advantages and disadvantages of different interference suppressing circuits are as
follows:
Connection diagram Load current / voltage
curve Advantages Disadvantages
Uncritical dimensioning
Lowest possible induced
voltage
Very simple and reliable
High release delay
VDR
Uncritical dimensioning
High energy absorption
Very simple setup
Suitable for AC voltage
Reverse polarity protected
No attenuation below VVDR
C
R
HF attenuation by energy
storage
Immediate shut-off limiting
Attenuation below limiting
voltage
Very suitable for AC voltage
Reverse polarity protected
Exact dimensioning
required
3.3.12 Analog Inputs (0 to 2000 Ohm | 0/4 to 20 mA | 0 to 1 V)
It is recommended to use two-pole analog senders for best possible accuracy.
Connect the resistive analog input's return wires (GND) always to Engine Ground
(terminal 15) and as close to the easYgen terminals as possible.
For two pole senders of 0/4 to 20 mA or 0 to 1 V sensors Engine Ground is no "must
have".
The following curves may be used for the analog inputs:
• Table A •
• Table B •
• Linear •
• Pt100 •
• Pt1000 •
• AB 94099 •
• VDO 120° C •
• VDO 150° C •
105 easYgen-3000XT Series B37574
3 Installation
3.3.12 Analog Inputs (0 to 2000 Ohm | 0/4 to 20 mA | 0 to 1 V)
Released