Woodward easYgen-3000XT Series, Руководство пользователя

Страница: 1065 / 1205

Para‐
meter
no. Object
ID Name Unit Data
type Note
set twice to
acknowledge
Bit 3 Must always be set to
0
Bit 2 Must always be set to
0
Bit 1 Stop bit (rising edge) To stop, a 0 must be written and
then a 1
Bit 0 Start bit (rising edge) To start, a 0 must be written and
then a 1
Table 132: Remote control telegram
Bit 0
Start bit
With the rising edge of the bit, the easYgen activates the remote request command
(LogicsManager input command variable 04.13).
The condition of the start command will be stored and may be used as command variable
for the LogicsManager.
Bit 1
Stop bit
With the rising edge of the bit, the easYgen deactivates the remote request command
(LogicsManager input command variable 04.13).
The condition of the start command will be stored and may be used as command variable
for the LogicsManager.
Bit 4
"Reset alarms"
This bit controls the LogicsManager input command variable 04.14. The remote
acknowledge bit must be set and reset twice to acknowledge an alarm completely. The first
rising edge disables the horn and the second rising edge resets the alarm.
Bit 9
"Shutdown command"
This bit is directly influencing the LogicsManager command variable: “03.40 Remote
Shutdown“ and can be taken to create an engine shut down and/or an alarm over an
internal flag.
Remote start /stop The command variable "04.13 Remote request" changes to "1" (high) if the start bit is
enabled and changes back to "0" (low) if the stop bit is enabled.
Ext. acknowledge The command variable "04.14 Remote acknowledge" is the reflection of the control bit. The
easYgen deactivates the horn with the first change from "0" to "1" of the logical output
"External acknowledge", and acknowledges all alarm messages, which have occurred and
are no longer active, with the second change from "0" to "1".
1065 easYgen-3000XT Series B37574
9 Appendix
9.2.9.1 Receive Data (sent from remote control to the easYgen)
Released