Woodward easYgen-3000XT Series, Руководство пользователя

Страница: 673 / 1205

5.2.1 Operating Mode STOP
Usage
⚙
1. ▷
Use the STOP button to activate operating mode STOP.
Observe the notes on the system's reaction upon activation of operating
mode STOP as listed below.
▶ STOP LED is illuminated at the front panel; ToolKit home page shows STOP icon left
beside the prime mover.
System reaction
In operating mode STOP neither the engine nor the GCB can be operated. Dependent on
the application mode the power circuit breakers cannot be operated.
CAUTION!
Hazards due to improper use of operating mode STOP
Selecting the operating mode STOP is not the same as an EMERGENCY STOP.
In some cases the easYgen will perform additional logic functions, such as an engine cool
down period, before the engine is stopped.
• For emergency stop functionality use an EMERGENCY STOP discrete input, •
programmed as an F class alarm.
If the operating mode STOP is selected while the engine was already stopped the
following applies:
• The GCB will not be closed. •
• The fuel solenoid relay will not be enabled. •
• The start request is ignored. •
• The start push buttons (softkeys) are disabled. •
• The engine/generator monitoring remains activated (exception: all monitoring that is •
delayed by the engine speed).
If the operating mode STOP is selected while the engine was running the following
applies:
• Dependent on the current application mode a soft shut down will be executed. •
• Pressing the STOP button again opens the GCB. •
• If the STOP button is pressed again, the cool down will be interrupted. •
673 easYgen-3000XT Series B37574
5 Operation
5.2.1 Operating Mode STOP
Released