Woodward easYgen-3000XT Series, Руководство пользователя

Страница: 811 / 1205

Word
0
Word 1 Word 2 Word 3 Word 4 Word 5 Word 6
Sign
1 Op.
1 Sign
2 Op.
2 Sign
3 -/- -/- -/-
3.00 sec 10.00 sec ¾ Or False Or ¾ 00 00 00 No. 09.02
ID =
520 dec
No. 96.08
ID =
7 dec
No. 04.13
ID =
251 dec
012c (hex) 03E8 (hex) 1 2 3 2 1 0 0 0 0208 (hex) 0007 (hex) 00FB (hex)
low
byte high
byte low
byte high
byte "as is" "as is" low
byte high
byte low
byte high
byte low
byte high
byte
2C01
(hex) E803 (hex) 1232 (hex) 1000 (hex) 0802 (hex) 0700 (hex) FB00 (hex)
Table 123: Start req. in AUTO message
6.5.2.3.5 Configuration Of LogicsManager Function "External Acknowledge"
The LogicsManager function "Ext. acknowledge" (parameter ╚═▷ 12490 ) can be
configured in a way that an external acknowledgment is performed as soon as the remote
acknowledge signal is enabled.
Refer to ╚═▷ “6.3.5 Performing Remote Start/Stop And Acknowledgment” for a detailed
configuration of the LogicsManager via HMI or ToolKit.
External acknowledge may be enabled by setting bit 4 (external acknowledge) of the
remote control word 503 to HIGH (refer to
╚═▷ “9.2.9 Additional Data Identifier” ).
Example
⚙
ᐳ
Fig. 314: LogicsManager function sample 12490
To configure the LogicsManager function "Ext. acknowledge" (parameter ╚═▷ 12490 ) as
indicated in ( ╚═▷ Fig. 314 ) the following Modbus message must be sent to the easYgen:
See table ╚═▷ Table 124 below.
811 easYgen-3000XT Series B37574
6 Application Field
6.5.2.3.5 Configuration Of LogicsManager Function "External Acknowledge"
Released