Woodward easYgen-3000XT Series, Руководство пользователя

Страница: 475 / 1205

ID Parameter CL Setting range
[Default]
Description
2500 Monitoring 2 [On] Monitoring of the stop sequence is
carried out according to the
following parameters.
Off Monitoring is disabled.
2503 Maximum stop delay 2 3 to 999 s
[30 s]
The maximum permissible time
between the output of a stop
command and the reply that the
engine is stopped successfully is
defined here.
Notes
If the engine cannot be stopped
within this time (this means speed
via the Pickup, frequency via the
generator voltage, or the
LogicsManager is detected) the
action specified by the alarm class
is initiated.
2501 Alarm class 2 Class A, Class B, Class C, Class D,
Class E, Class F , Control
[Class F]
Each limit may be assigned an
independent alarm class that
specifies what action should be
taken when the limit is surpassed.
Notes
For additional information refer to
╚═▷ “9.5.4 Alarm Classes”
2502 Self acknowledge 4 Yes The control unit automatically
clears the alarm if the fault
condition is no longer detected.
[No] The control unit does not
automatically reset the alarm
when the fault condition is no
longer detected.
The alarm must be acknowledged
and reset by manually pressing
the appropriate buttons or by
activating the LogicsManager
output "External
acknowledgment" (via a discrete
input or via an interface).
4.5.2.6 Engine Unintended Stop
General notes
If an engine stop has been detected without a stop command being issued, an alarm will
be initiated.
If this protective function is triggered, the display indicates "Unintended stop" and the
logical command variable "05.05" will be enabled.
475 easYgen-3000XT Series B37574
4 Configuration
4.5.2.6 Engine Unintended Stop
Released