Woodward easYgen-3000XT Series, Руководство пользователя

Страница: 1135 / 1205

Relay outputs
Simple (function) Extended (configuration) Result
[99.01] Relay 1 [R01] - Ready for
operation OFF FALSE
Relay will be de-energized if unit is not
ready for operation or the logics manager
output is TRUE.
Deactivated by default
Note: This function is pre-configured and
may be activated by passing through the
command variables [01.09] Shutdown
alarm or [04.01] Operating mode AUTO or
[00.01] LM: Flag 1 ('―' instead of '0').
The unit is only ready for operation after an
start-up delay following the power supply
connection.
[99.02] Relay 2 [R02] - Centralized
alarm (horn) / freely configurable dependent
on Logics
Command
Variable
[03.05]
Relay energizes if the internal condition
"Horn" is TRUE
[99.03] Relay 3 [R03] - Starter / freely
configurable dependent
on Logics
Command
Variable
[03.02]
Relay energizes if the internal condition
"Starter" is TRUE
[99.04] Relay 4 [R04] - Start/Gas /
freely configurable dependent
on Logics
Command
Variable
[03.28]
Relay energizes if the internal condition
"Start/Gas" is TRUE to energize the start
(Diesel) or gas (Gas) solenoid
[99.05] Relay 5 [R05] - Preglow/
Ignition / freely configurable dependent
on Logics
Command
Variable
[03.04]
Relay energizes if the internal condition
"Preglow/Ignition" is TRUE to preglow the
Diesel engine or enabling the ignition of the
gas engine
[99.06] Relay 6 [R06] - Free /
Command: close GCB FALSE
In application mode
A01 and A02 = freely configurable relay
(unassigned)
1135 easYgen-3000XT Series B37574
9 Appendix
9.3.5 Factory Settings
Released