Woodward easYgen-3000XT Series, Руководство пользователя

Страница: 579 / 1205

ID Parameter CL Setting range
[Default]
Description
For additional information refer to
╚═▷ “9.5.4 Alarm Classes” .
4076 Delay 2 Yes The control automatically clears
the alarm if the fault condition is
no longer detected.
[No] The control does not automatically
reset the alarm when the fault
condition is no longer detected.
The alarm must be acknowledged
and reset by manually pressing
the appropriate buttons or by
activating the LogicsManager
output "External
acknowledgment" (via a discrete
input or via an interface).
4078 Enabled 2 [Always] Monitoring for this fault condition
is continuously enabled.
87.70 LM:Eng.mon Monitoring for fault conditions is
not performed until engine
monitoring is enabled.
This is determined through the
LogicsManager equation "Release
engine monitoring". For xx = 1 to
32: 96.{xx}, LM: Flag{xx}
The monitoring is executed, if the
LogicsManager "Flag {xx}" is
TRUE.
Example: 96.01 LM: Flag 1, 96.02
LM: Flag 2, ..., 96.32 LM: Flag 32
4077 Self acknowledge 2 0.02 to 999.99 s
3.00 s
Parameter alignment monitoring
delay
If a parameter alignment error
occurs, the alarm will be delayed
by a basic delay time (depending
on the communication method)
plus the delay time defined here.
4.5.6.17 Multi-Unit Missing easYgen
General notes
The multi-unit missing easYgen monitoring function checks whether all participating units
are available (sending data on the load share line).
If the number of available units is less than the number of displayed "Monitored easYgen"
╚═▷ 9925 (initiated by parameter ╚═▷ 13356 System update) for at least the delay time,
the display indicates "Missing easYgen" and the logical command variables "08.17" and
"08.27" will be enabled.
579 easYgen-3000XT Series B37574
4 Configuration
4.5.6.17 Multi-Unit Missing easYgen
Released