Woodward easYgen-3000XT Series, Руководство пользователя

Страница: 547 / 1205

ID Parameter CL Setting range
[Default]
Description
output "External
acknowledgment" (via a discrete
input or via an interface).
1940 Enabled 2 [Always] Monitoring for this fault condition
is continuously enabled.
87.70LM:Eng.mon Monitoring for fault conditions is
not performed until engine
monitoring is enabled. This is
determined through the
LogicsManager equation "Release
engine monitoring".
For xx = 1 to 32: 96.{xx} LM:
Flag{xx} The monitoring is executed, if the
LogicsManager "Flag {xx}" is
TRUE. Example: 96.01 LM: Flag 1,
96.02 LM: Flag 2, ..., 96.32 LM:
Flag 32
4.5.4.7 MCB plausibility
If breaker mode GCB/MCB is configured, this alarm trips (according to the monitor
settings) if the number of closed MCBs is different to the number of easYgen devices in
the same segment.
ID Parameter CL Setting range
[Default]
Description
1941 Monitoring 2 [Off] Monitoring is disabled.
On Monitoring of the MCB plausibility
is carried out according to the
following parameters.
1942 Delay 2 0.02 to 99.90 s
[0.20 s]
If the conditions are fulfilled for
this time the alarm "MCB
plausibility" will trip and the
command variable 08.48 becomes
active.
1943 Alarm class 2 Class A, Class B, Class C, Class D,
Class E, Class F , Control
[Class B]
An alarm can be assigned that
specifies what action should be
taken when the conditions are
fulfilled.
Notes
For additional information refer to
╚═▷ “9.5.4 Alarm Classes”
1944 Self acknowledge 2 Yes The control unit automatically
clears the alarm if the fault
condition is no longer detected.
[No] The control unit does not
automatically reset the alarm
when the fault condition is no
longer detected.
The alarm must be acknowledged
and reset by manually pressing
547 easYgen-3000XT Series B37574
4 Configuration
4.5.4.7 MCB plausibility
Released