Woodward easYgen-3000XT Series, Руководство пользователя

Страница: 570 / 1205

ID Parameter CL Setting range
[Default]
Description
acknowledgment" (via a discrete
input or via an interface).
1918 Enabled 2 [Always] Monitoring for this fault condition
is continuously enabled.
87.70 LM:Eng.mon Monitoring for fault conditions is
not performed until engine
monitoring is enabled. This is
determined through the
LogicsManager equation "Release
engine monitoring".
For xx = 1 to 32:
96.{xx}
LM: Flag{xx}
The monitoring is executed, if the
LogicsManager "Flag {xx}" is
TRUE.
Example:
96.01 LM: Flag 1, 96.02 LM: Flag
2, ..., 96.32 LM: Flag 32
4.5.6.10 J1939 Interface - Emission/Malfunction Alarm
General notes
This monitor monitors, whether a specific alarm bit is received from the CAN J1939
interface. This enables to configure the easYgen in a way that a reaction is caused by this
bit (e.g. warning, shutdown).
If this protective function is triggered, the display indicates "Emission lamp DM1" and the
logical command variable "03.45" will be enabled.
ID Parameter CL Setting range
[Default]
Description
1919 Monitoring 2 On Monitoring of the Emission
Warning Lamp message from the
ECU is carried out according to the
following parameters.
[Off] Monitoring is disabled.
1920 Delay 2 0 to 999 s
[2 s]
The Emission warning lamp delay
is configured with this parameter.
If the ECU sends the Emission
Warning Lamp On message, the
action specified by the alarm class
is initiated after the delay
configured here expires.
1921 Alarm class 2 Class A, Class B, Class C, Class D,
Class E, Class F , Control
[Class A]
An alarm can be assigned, that
specifies what action should be
taken when the conditions are
fulfilled.
Notes
570 easYgen-3000XT Series B37574
4 Configuration
4.5.6.10 J1939 Interface - Emission/Malfunction Alarm
Released