Woodward easYgen-3000XT Series, Руководство пользователя

Страница: 797 / 1205

☼
Example 2: Power factor interface setpoint
The power factor setpoint value must be written to object 21FC (hex), i.e. parameter
508.
A power factor of 1 = 1000 (dec) = 03E8 (hex) is to be transmitted.
• Modbus address = 40000 + (Par. ID + 1) = 40509 •
• Modbus length = 1 (UNSIGNED 16)
•
⚙
ᐳ To set the parameter address in ModScan32:
1. ▷
Fig. 295: Modscan32 at address 40509
Analogous to ╚═▷ Chapter 6.5.1.2 set the parameter address as shown in ╚═▷ Fig. 295 .
☼
Example 3: Frequency interface setpoint
The frequency setpoint value must be written to object 21FD (hex), i.e. parameter 509.
A frequency value of 50.00 Hz = 5000 (dec) = 1388 (hex) is to be transmitted.
• Modbus address = 40000 + (Par. ID + 1) = 40510 •
• Modbus length = 1 (UNSIGNED 16)
•
⚙
ᐳ
To set the parameter address in ModScan32:
1. ▷
Fig. 296: Modscan32 at address 40510
Analogous to ╚═▷ Chapter 6.5.1.2 set the parameter address as shown in ╚═▷ Fig. 296 .
797 easYgen-3000XT Series B37574
6 Application Field
6.5.1.2 Setpoint Setting
Released